Washer and Dryer Combo  Repair Maintenance and Installation Services

1. The unit won’t start or power on
What we repair: Faulty door-lock switches, blown fuses, bad control boards, loose power cords.
Quick check: Confirm the breaker isn’t tripped and the door is fully latched. If the panel stays dark, call Elite Systems Experts and we’ll restore power the same day.
 

2. Drum won’t spin or agitate
What we repair: Worn drive belts, failed motor couplers, seized bearings, control-board faults.
Quick check: Make sure the load isn’t uneven or overfilled. Still stuck? Call Elite Systems Experts for a belt or motor replacement before further damage occurs.
 

3. Water won’t drain after the wash cycle
What we repair: Clogged drain pumps, kinked hoses, blocked coin traps, and lid-switch failures.
Quick check: Clean the pump filter (usually behind the toe-kick). Standing water after that? Call Elite Systems Experts, and we’ll clear or replace the pump fast.
 

4. Excessive vibration or “walking” across the floor
What we repair: Broken suspension rods, worn shock absorbers, warped leveling feet.
Quick check: Verify all shipping bolts were removed and the feet sit flat. Shaking continues? Call Elite Systems Experts to balance the tub and replace shocks.
 

5. Clothes come out sopping wet
What we repair: Failed drain pumps, weak drive motors, slip-ping belts, low spin-speed control boards.
Quick check: Use the “Spin Only” option to see if the drum reaches full speed. If not, call Elite Systems Experts—we’ll restore a proper high-speed spin.
 

6.Dryer side not heating or takes forever to dry
What we repair: Burned-out heating elements, faulty thermostats, clogged lint ducts, failed gas igniters.
Quick check: Clean the lint filter and verify the exterior vent flap opens freely. Still damp? Call Elite Systems Experts to replace the element or clear hidden duct obstructions.
 

7. Stops mid-cycle or flashes error codes
What we repair: Overheating sensors, bad thermistors, control-board glitches, power-supply issues.
Quick check: Unplug the unit for five minutes to reset electronics. If the same code returns, note it and call Elite Systems Experts so we can arrive with the correct part.
 

8. The door won’t unlock after the cycle
What we repair: Stuck door-lock actuators, pressure-switch faults, software errors.
Quick check: Run a “Drain/Spin” cycle to clear leftover water. Still locked? Call Elite Systems Experts—we can safely release the latch and replace the faulty actuator.
 

9. Water or suds leaking onto the floor
What we repair: Torn door gaskets, cracked hoses, loose clamps, backed-up drain lines.
Quick check: Use only HE detergent and the right amount—oversudsing can force water out. Persistent leaks? Call Elite Systems Experts to reseal or swap hoses and gaskets.
 

10. Burning smell or lint buildup warnings
What we repair: Melted wiring, overheating motors, blocked lint chutes, and failed blower wheels.
Quick check: Stop the machine immediately and inspect the lint filter. If odor remains, call Elite Systems Experts for a safety inspection and deep lint-path cleaning.
 

Have a stacked washer-dryer combo giving you grief? Call or text 347-939-6833 Elite Systems Experts (replace with your real number) or book online 24/7. Our factory-trained technicians serve Westchester, Manhattan, Fairfield County, and nearby areas, and every repair is backed by our satisfaction guarantee.